If you are looking for comparisons between Brother CS5055PRW and Janome MOD-30, you’re at the right place. Which sewing machine is the right choice for you? They’re both solidly built and would be a fantastic machine for anyone who loves to sew.
What are the main differences between them? Allow me to simplify my answers here.
Brother CS5055PRW vs. Janome MOD-30: Comparison in Features
Sewing Machine Types
Brother CS5055PRW and Janome MOD-30 are both computerized sewing machines. Computerized sewing machines allow you to save new patterns and stitch types to the onboard memory. It is possible for users to create their own stitches, or even patterns, depending on the machine they work with.
Contrary to what you might think, digital machines might be some of the easiest ones to operate. They were actually created to make our lives easier. Or, rather, they were supposed to make it easier and faster to make clothes in factories.
Brother CS5055PRW vs. Janome MOD-30 : Built-in Stitches
There are 50 stitches on Brother CS5055PRW. On the other hand, the Janome MOD-30 has 30 built-in stitches. Brother CS5055PRW comes with 5 one-step buttonhole(s), while Janome MOD-30 has only 3 one-step buttonhole(s).
The Brother CS5055PRW sewing machine weighs approximately 10.65 lbs, while the Janome MOD-30 sewing machine comes with a weight of 12.7 lbs.
The extra weight can become cumbersome if you don’t have a set location in your home for your sewing machine.
The Brother CS5055PRW doesn’t come with a start/stop button, while the Janome MOD-30 sewing machine does. One of the best ways of controlling some of your variables within free motion quilting is by using your start/stop button.
Speed Control Slider
The Janome MOD-30 sewing machine arrives with a speed control slider while the Brother CS5055PRW doesn’t. A speed control slide is a useful feature that allows you to set the maximum speed you are comfortable with.
Automatic Needle Threader
Many sewing machines sold today come with an automatic threader function. This is essentially a lever that will guide the thread through the eye of your sewing needle for you so that you don’t have to do it yourself. Many sewists prefer to thread their own needles, but if you have difficulty performing this task, then a machine with an automatic needle threader might be very useful for you. Fortunately, these two sewing machines both come with automatic needle threader, allowing you to thread the machine with ease.
The advantage of easy drop-in, top load bobbins is that you can readily see how much thread is left on the bobbin through the window. You do not have to remove the bobbin case to insert a new bobbin, and you do not have to remove the accessory tray from the free arm to change bobbins. Both the Brother CS5055PRW sewing machine and the Janome MOD-30 come with this user-friendly feature.
The most common type of feeding mechanism in a home sewing machine (and some industrial machines) is the drop feed, also known as the regular feed system. Both Brother CS5055PRW and Janome MOD-30 come equipped with a drop feed system, which grabs the fabric and moves it along through the machine.
There is free arm on both the Brother CS5055PRW and the Janome MOD-30. The free arm is a very useful feature to all sewing machines as it makes sewing one layer of fabric without catching another. This is because all of the workings around the bobbin race, feed dogs, and needles are housed there.
|Brother CS5055PRW||Janome MOD-30|
|Sewing Machine Type||Electronic||Computerized|
|Buttonhole Styles||5 one-step||3 one-step|
|Programmable Needle Up/Down||No||Yes|
|Speed Control Slider||No||Yes|
|Weight||10.65 lbs||12.7 lbs|
|Extra High Presser Foot Lifter||–||Yes|
|Snap-on Presser Foot||–||Yes|
|Automatic Thread Cutter||No||–|
|Automatic Needle Threader||Yes||Yes|
|Stitch Selection||LCD and Push Button||LCD Push Button|
|Adjustable Stitch Length/Width||Yes||Yes|
|Included Feet||Buttonhole foot, Zigzag foot, Zipper foot, Button sewing foot, Overcasting foot, Blind stitch foot, Monogramming foot||Buttonhole Foot, Open Toe Satin Stitch Foot, Overedge Foot, Zipper Foot|
|Dedicated Locking Stitch Button||–||Yes|
|Tension||Adjustable With Dial||–|
|Warranty||25 Year Limited||–|
|Price||Check Price on Amazon||Check Price on Amazon|
Brother CS5055PRW Video Review
Janome MOD-30 Video Review
When you compare the performances, both machines are neck on neck. There isn’t a lot of difference in stitch quality. Both machines handle thick and delicate fabrics exceptionally well. In fact, the stitch quality is one factor that makes these two machines different from other machines in their segment. From the feature differences we have listed above, we believe you will be able to make a decision on your own. We will leave this one to you.
Q. Why use a bobbin on a sewing machine
A. In general, the bobbin is the thing that feeds the thread to stitch from the lower part of the machine. Its purpose is to hold the thread below the needle, and it is where the thread in which you stitch comes from.
Q. Can i use 3 in 1 oil on my sewing machine
A. You shouldn’t use cooking oil or automotive oil in your machine, since doing so may clog the gears and damage any fabric used in the machine. Also, 3-in-1 oil is not suitable for sewing machines, according to Threads magazine.
Q. What are features to look for in a sewing machine?
A. The best features will depend on the type of sewing you plan to do. For a beginner, some features to look for include built-in stitch types, an automatic needle threader, a top drop-in bobbin, and a set of standard presser feet.
Q. Why use a walking foot on a sewing machine
A. A walking foot helps move knit fabrics evenly so they don’t stretch out of shape. The walking foot eliminates the need for excessive pinning when working with slippery fabrics. That is especially useful because most of those slippery fabrics, such as satin, are easily damaged by pins.
Q. Why adjust tension on sewing machine
A. Sewing machine tension adjustment is controlled by devices that separately control the needle thread and the bobbin thread, putting varying amounts of tension (or strength) on the threads they control to form a strong, balanced stitch.
Q. Can I interchange metal and plastic bobbins if they are the same size?
A. Metal bobbins and plastic bobbins of the same size can NOT be swapped. Machines are set for a very precise tension setting. If they are set for a lighter plastic bobbin, the tension will change if a heavier metal bobbin is used.