When you buy through links on this site, I may earn an affiliate commission at no extra cost to you. Learn more.

Janome 2212 vs. Janome HD1000 Comparison

In this comparison, we are going to compare one of the most popular affordable sewing machines, the Janome 2212 and Janome HD1000. What made these two sewing machines stand out was that they were packed with features in an affordable range combined with excellent stitch quality.

What are the major differences between them? Here I will try to answer them as simply as possible.

Janome 2212 vs. Janome HD1000: Comparison in Features

Sewing Machine Types

Janome 2212 and Janome HD1000 are both mechanical sewing machines. The mechanical sewing machine has fewer stitch options than a computerized sewing machine, but it is easier to maintain and costs less.

Janome 2212 vs. Janome HD1000 : Built-in Stitches

There are 12 stitches on Janome 2212. On the other hand, the Janome HD1000 has 14 built-in stitches. Janome 2212 sewing machine comes with 1 four-step buttonhole(s), while Janome HD1000 has only 1 four-step buttonhole(s).

Weight

The Janome 2212 sewing machine weighs approximately 13 lbs, while the Janome HD1000 comes with a weight of 16.8 lbs.

The extra weight can become cumbersome if you don’t have a set location in your home for your sewing machine.

Start/Stop Button

Neither Janome 2212 nor Janome HD1000 has a start/stop button. This might not be convenient for a novice to sew effectively.

Speed Control Slider

Neither Janome 2212 sewing machine nor Janome HD1000 has a speed control slider. With a speed control slider, the sewing speed will never go above your selected speed, no matter how hard you press on the pedal.

Automatic Needle Threader

To assist the user, self-threading sewing machines have what is called an automatic needle threader. The Janome HD1000 has one while the Janome 2212 doesn’t.

Programmable Needle Up/Down

With a programmable needle up/down function, the needle will stop down in the fabric, allowing you to raise the presser foot and adjust the fabric without the fabric moving out of position because the needle will hold the fabric in place. However, unfortunately, these two sewing machines come with this feature.

Drop Feed

The most common type of feeding mechanism in a home sewing machine (and some industrial machines) is the drop feed, also known as the regular feed system. Both Janome 2212 and Janome HD1000 come equipped with a drop feed system, which grabs the fabric and moves it along through the machine.

Free Arm

There is free arm on both the Janome 2212 and the Janome HD1000. The free arm is a very useful feature to all sewing machines as it makes sewing one layer of fabric without catching another. This is because all of the workings around the bobbin race, feed dogs, and needles are housed there.

Extra High Presser Foot Lifter

The extra-high presser foot lifter of the Janome 2212 and Janome HD1000 allows you to adjust the height, as needed for large sewing projects or multiple layers of thick materials.

Janome 2212 Janome HD1000
Product Image
Sewing Machine Type Mechanical Mechanical
Stitches 12 14
Buttonhole Styles 1 four-step 1 four-step
Start/Stop Button No No
Built-in Memory No No
Programmable Needle Up/Down No No
Monogramming Font No No
Drop Feed Yes Yes
Free Arm Yes Yes
Working Light Yes Yes
Speed Control Slider No No
Weight 13 lbs 16.8 lbs
Extra High Presser Foot Lifter Yes Yes
Snap-on Presser Foot Yes Yes
Automatic Thread Cutter No No
Automatic Needle Threader No Yes
Drop-in Bobbin No No
USB Connectivity No No
Stitch Selection Dial Dial
Adjustable Stitch Length/Width Yes Yes
Included Feet Blind Hem Foot, Sliding Buttonhole Foot, Zig-Zag Foot Rolled Hem Foot, Zigzag Foot
Dedicated Locking Stitch Button No No
Tension Adjustable With Dial Adjustable With Dial
Knee Lifter No No
Warranty 25 Year Limited 25 Year Limited
Price Check Price on Amazon Check Price on Amazon

Janome 2212 Video Review

Janome HD1000 Video Review

The Verdict

These two machines perform equally well when you compare their performances. There is not much difference in stitch quality between these two machines. Thick and delicate fabrics are handled equally well by both machines. These two machines are notable for the stitch quality they offer, and it is what sets them apart from the competition. Our comparison of the features we listed above allows you to come to your own conclusion. Finally, it’s your decision.

Q. Why use a bobbin on a sewing machine

A. In general, the bobbin is the thing that feeds the thread to stitch from the lower part of the machine. Its purpose is to hold the thread below the needle, and it is where the thread in which you stitch comes from.

Q. Can a normal sewing machine sew canvas?

A. Yes, canvas can be sewn on a regular sewing machine.

Q. Can a regular sewing machine sew vinyl?

A. Yes, with the same modifications listed above for leather.

Q. How do I thread a sewing machine?

To get started with your sewing project, you’ll need to first thread your sewing machine. While your machine’s manual should guide you in the specific sequence for your make and model, the basic process starts by placing the presser foot in the up position.

Next, put your thread spool on the spool holder and bring the thread across the top of the machine, through the thread guide. Insert the thread through the tension mechanism, sliding it between the metal disks before pulling it back upwards. Find the take-up lever and place the thread into the hole. Pull the thread towards the sewing machine needle, using available thread guides as you go.

Finally, bring the needle into an accessible position by adjusting the handwheel. Insert the thread. Your sewing machine should be threaded and ready to go, but it’s always a good idea to make a test run on a sample swatch to check your work.

However, if you sewing machine comes with an automatic needle threader, that would save you lots of time.

Q. Do you need a special sewing machine for leather?

A. No, although a heavy-duty machine will make it easier. However, any good-quality home sewing machine can handle leather with a few special accessories. You will need a Teflon presser foot, a needle designed for sewing leather, and heavy-duty thread.

Q. Can I interchange metal and plastic bobbins if they are the same size?

A. Metal bobbins and plastic bobbins of the same size can NOT be swapped. Machines are set for a very precise tension setting. If they are set for a lighter plastic bobbin, the tension will change if a heavier metal bobbin is used.