When you buy through links on this site, I may earn an affiliate commission at no extra cost to you. Learn more.

Janome DC2013 vs. Janome MOD-50 Comparison

If you are looking for comparisons between Janome DC2013 and Janome MOD-50, you’re at the right place. Which sewing machine is the right choice for you? They’re both solidly built and would be a fantastic machine for anyone who loves to sew.

What are the main differences between them? Allow me to simplify my answers here.

Janome DC2013 vs. Janome MOD-50: Comparison in Features

Sewing Machine Types

Janome DC2013 and Janome MOD-50 are both computerized sewing machines. Computerized sewing machines allow you to save new patterns and stitch types to the onboard memory. It is possible for users to create their own stitches, or even patterns, depending on the machine they work with.

Contrary to what you might think, digital machines might be some of the easiest ones to operate. They were actually created to make our lives easier. Or, rather, they were supposed to make it easier and faster to make clothes in factories.

Janome DC2013 vs. Janome MOD-50 : Built-in Stitches

There are 50 stitches on Janome DC2013. On the other hand, the Janome MOD-50 has 50 built-in stitches. Janome DC2013 comes with 3 one-step buttonhole(s), while Janome MOD-50 sewing machine has only 3 one-step buttonhole(s).

Weight

The Janome DC2013 weighs approximately 18.2lbs, while the Janome MOD-50 comes with a weight of 12.7lbs.

When you don’t have a specific spot in your home where your sewing machine belongs, the extra weight can become burdensome.

Start/Stop Button

The Janome DC2013 doesn’t come with a start/stop button, while the Janome MOD-50 sewing machine does. One of the best ways of controlling some of your variables within free motion quilting is by using your start/stop button.

Speed Control Slider

Both Janome DC2013 and Janome MOD-50 sewing machine have a speed control slider, which allows you to set the maximum speed you are comfortable with.

Automatic Needle Threader

Many sewing machines sold today come with an automatic threader function. This is essentially a lever that will guide the thread through the eye of your sewing needle for you so that you don’t have to do it yourself. Many sewists prefer to thread their own needles, but if you have difficulty performing this task, then a machine with an automatic needle threader might be very useful for you. Fortunately, these two sewing machines both come with automatic needle threader, allowing you to thread the machine with ease.

Drop-in Bobbin

The advantage of easy drop-in, top load bobbins is that you can readily see how much thread is left on the bobbin through the window. You do not have to remove the bobbin case to insert a new bobbin, and you do not have to remove the accessory tray from the free arm to change bobbins. Both the Janome DC2013 and the Janome MOD-50 come with this user-friendly feature.

Drop Feed

The most common type of feeding mechanism in a home sewing machine (and some industrial machines) is the drop feed, also known as the regular feed system. Both Janome DC2013 and Janome MOD-50 come equipped with a drop feed system, which grabs the fabric and moves it along through the machine.

Free Arm

There is free arm on both the Janome DC2013 and the Janome MOD-50. The free arm is a very useful feature to all sewing machines as it makes sewing one layer of fabric without catching another. This is because all of the workings around the bobbin race, feed dogs, and needles are housed there.

Extra High Presser Foot Lifter

The extra-high presser foot lifter of the Janome DC2013 and Janome MOD-50 allows you to adjust the height, as needed for large sewing projects or multiple layers of thick materials.

Janome DC2013 Janome MOD-50
Product Image
Sewing Machine Type Computerized Computerized
Stitches 50 50
Buttonhole Styles 3 one-step 3 one-step
Start/Stop Button No Yes
Built-in Memory
Programmable Needle Up/Down Yes Yes
Monogramming Font No No
Drop Feed Yes Yes
Free Arm Yes Yes
Working Light Yes Yes
Speed Control Slider Yes Yes
Weight 18.2lbs 12.7lbs
Extra High Presser Foot Lifter Yes Yes
Snap-on Presser Foot Yes Yes
Automatic Thread Cutter No
Automatic Needle Threader Yes Yes
Drop-in Bobbin Yes Yes
USB Connectivity No
Stitch Selection LCD and Push Button LCD Display and Push Button
Adjustable Stitch Length/Width Yes Yes
Included Feet Blind Hem Foot, Even Feed Foot, Overedge Foot, Satin Stitch Foot F, Zig-Zag Foot Please confirm at the time of purchase
Dedicated Locking Stitch Button Yes Yes
Tension Adjustable by dial
Knee Lifter No
Warranty
Price Check Price on Amazon Check Price on Amazon

Janome DC2013 Video Review

Janome MOD-50 Video Review

The Verdict

These two machines perform equally well when you compare their performances. There is not much difference in stitch quality between these two machines. Thick and delicate fabrics are handled equally well by both machines. These two machines are notable for the stitch quality they offer, and it is what sets them apart from the competition. Our comparison of the features we listed above allows you to come to your own conclusion. Finally, it’s your decision.

Q. Why adjust tension on sewing machine

A. Sewing machine tension adjustment is controlled by devices that separately control the needle thread and the bobbin thread, putting varying amounts of tension (or strength) on the threads they control to form a strong, balanced stitch.

Q. What type of maintenance do sewing machines need?

A. Today’s sewing machines usually require just a few basic steps to keep them in good working order. While the manual included with your machine will spell out the details, it’s important to regularly remove the throat plate and use a small, soft brush to remove thread, lint, and debris that might have become lodged inside the machine. Your machine may also require oiling to keep everything lubricated and running smoothly.

Q. Can i use 3 in 1 oil on my sewing machine

A. You shouldn’t use cooking oil or automotive oil in your machine, since doing so may clog the gears and damage any fabric used in the machine. Also, 3-in-1 oil is not suitable for sewing machines, according to Threads magazine.

Q. Can i use serger thread in my sewing machine

A. Do not use serger thread in your sewing machine. These spools of thread are tempting to buy because they’re inexpensive, but they have a very rough texture on the thread. So if you put it in your regular sewing machine, it’s going to break and jam and you’ll be really frustrated.

Q. Can i use clipper oil on my sewing machine

A. Yes, you can as some people do recommend it as an alternative to sewing machine oil.

Q. Can I interchange metal and plastic bobbins if they are the same size?

A. Metal bobbins and plastic bobbins of the same size can NOT be swapped. Machines are set for a very precise tension setting. If they are set for a lighter plastic bobbin, the tension will change if a heavier metal bobbin is used.